arrow
Volume 11, Issue 4
Exploration and Experimental Research on the Mechanism of Electromagnetic Driven Weft Insertion

Xian-Ze Cui, Chi Zhang, Xiao-Guang Wu, Cheng-jun Zhang & Xiu-Sheng Xu

Journal of Fiber Bioengineering & Informatics, 11 (2018), pp. 197-207.

Published online: 2019-02

Export citation
  • Abstract

In view of the current situation that there exists big impact and friction between the gripper and the guide in the weft insertion mode of the existing gripper loom, this paper puts forward the idea of the electromagnetic-driven two-way weft insertion on gripper in order to improve the energy conversion efficiency, reduce the friction and mechanical vibration. Electromagnetic drive is used as the basic method to study the projecting/braking of the shuttle, and it uses the principle of electromagnetic levitation as the basic principle of the shuttle’s weft insertion. In this paper, a basic model of two-way insertion is established. After ANSYS simulation and experimental analysis, the speed of electromagnetic driving can reach 30 m/s. In the electromagnetic levitation stage, PWM modulator and DC power regulation were respectively used to conduct the levitation control experiment. HW101 hall sensor was used to judge the levitation state, and with the assistance of other Operational Amplifier, the requirements of electromagnetic levitation were completed.

  • AMS Subject Headings

  • Copyright

COPYRIGHT: © Global Science Press

  • Email address

1615033004@mail.wtu.edu.cn (Xian-Ze Cui)

czhang1@wtu.edu.cn (Chi Zhang)

  • BibTex
  • RIS
  • TXT
@Article{JFBI-11-197, author = {Cui , Xian-ZeZhang , ChiWu , Xiao-GuangZhang , Cheng-jun and Xu , Xiu-Sheng}, title = {Exploration and Experimental Research on the Mechanism of Electromagnetic Driven Weft Insertion}, journal = {Journal of Fiber Bioengineering and Informatics}, year = {2019}, volume = {11}, number = {4}, pages = {197--207}, abstract = {

In view of the current situation that there exists big impact and friction between the gripper and the guide in the weft insertion mode of the existing gripper loom, this paper puts forward the idea of the electromagnetic-driven two-way weft insertion on gripper in order to improve the energy conversion efficiency, reduce the friction and mechanical vibration. Electromagnetic drive is used as the basic method to study the projecting/braking of the shuttle, and it uses the principle of electromagnetic levitation as the basic principle of the shuttle’s weft insertion. In this paper, a basic model of two-way insertion is established. After ANSYS simulation and experimental analysis, the speed of electromagnetic driving can reach 30 m/s. In the electromagnetic levitation stage, PWM modulator and DC power regulation were respectively used to conduct the levitation control experiment. HW101 hall sensor was used to judge the levitation state, and with the assistance of other Operational Amplifier, the requirements of electromagnetic levitation were completed.

}, issn = {2617-8699}, doi = {https://doi.org/10.3993/jfbim00300}, url = {http://global-sci.org/intro/article_detail/jfbi/13009.html} }
TY - JOUR T1 - Exploration and Experimental Research on the Mechanism of Electromagnetic Driven Weft Insertion AU - Cui , Xian-Ze AU - Zhang , Chi AU - Wu , Xiao-Guang AU - Zhang , Cheng-jun AU - Xu , Xiu-Sheng JO - Journal of Fiber Bioengineering and Informatics VL - 4 SP - 197 EP - 207 PY - 2019 DA - 2019/02 SN - 11 DO - http://doi.org/10.3993/jfbim00300 UR - https://global-sci.org/intro/article_detail/jfbi/13009.html KW - Gripper Loom KW - Weft Insertion KW - Electromagnetic Levitation KW - Shuttle Projecting. AB -

In view of the current situation that there exists big impact and friction between the gripper and the guide in the weft insertion mode of the existing gripper loom, this paper puts forward the idea of the electromagnetic-driven two-way weft insertion on gripper in order to improve the energy conversion efficiency, reduce the friction and mechanical vibration. Electromagnetic drive is used as the basic method to study the projecting/braking of the shuttle, and it uses the principle of electromagnetic levitation as the basic principle of the shuttle’s weft insertion. In this paper, a basic model of two-way insertion is established. After ANSYS simulation and experimental analysis, the speed of electromagnetic driving can reach 30 m/s. In the electromagnetic levitation stage, PWM modulator and DC power regulation were respectively used to conduct the levitation control experiment. HW101 hall sensor was used to judge the levitation state, and with the assistance of other Operational Amplifier, the requirements of electromagnetic levitation were completed.

Xian-Ze Cui, Chi Zhang, Xiao-Guang Wu, Cheng-jun Zhang & Xiu-Sheng Xu. (2020). Exploration and Experimental Research on the Mechanism of Electromagnetic Driven Weft Insertion. Journal of Fiber Bioengineering and Informatics. 11 (4). 197-207. doi:10.3993/jfbim00300
Copy to clipboard
The citation has been copied to your clipboard