arrow
Volume 2, Issue 3
Heat, Moisture and Air Transfer Properties of Selected Woven Fabrics in Wet State

Lubos Hes & Carmen Loghin

Journal of Fiber Bioengineering & Informatics, 2 (2009), pp. 141-149.

Published online: 2009-02

Export citation
  • Abstract
The most important parameters characterizing thermophysiological comfort of sport and protective garments are thermal resistance, water vapour permeability and air permeability. Contrary to common textiles, protective and functional garments and some technical textiles like textile dressings are also used in wet state, which affects their comfort properties. However, common measuring instruments mostly do not enable reliable measurement of wet fabrics, due to long time of measurement, during which the fabrics get dry. In this paper two fast measuring PC evaluated instruments ALAMBETA and PERMETEST commercial instruments are described, which provide reliable non-destructive measurement of thermal conductivity, thermal resistance and water vapour permeability of fabrics in dry and wet state. By means of these instruments, thermal resistance and water vapour permeability of heavy cotton and cotton/PES woven fabrics in wet state were experimentally determined and results were discussed. The effect of structure and composition on the above-mentioned properties of these fabrics has been investigated as well. Some surprising results were achieved: with increasing fabrics humidity, the air permeability almost linearly decreased, whereas the total cooling heat flow (due to water evaporation from the wet fabric surface) slowly increased.
  • AMS Subject Headings

  • Copyright

COPYRIGHT: © Global Science Press

  • Email address
  • BibTex
  • RIS
  • TXT
@Article{JFBI-2-141, author = {}, title = {Heat, Moisture and Air Transfer Properties of Selected Woven Fabrics in Wet State}, journal = {Journal of Fiber Bioengineering and Informatics}, year = {2009}, volume = {2}, number = {3}, pages = {141--149}, abstract = {The most important parameters characterizing thermophysiological comfort of sport and protective garments are thermal resistance, water vapour permeability and air permeability. Contrary to common textiles, protective and functional garments and some technical textiles like textile dressings are also used in wet state, which affects their comfort properties. However, common measuring instruments mostly do not enable reliable measurement of wet fabrics, due to long time of measurement, during which the fabrics get dry. In this paper two fast measuring PC evaluated instruments ALAMBETA and PERMETEST commercial instruments are described, which provide reliable non-destructive measurement of thermal conductivity, thermal resistance and water vapour permeability of fabrics in dry and wet state. By means of these instruments, thermal resistance and water vapour permeability of heavy cotton and cotton/PES woven fabrics in wet state were experimentally determined and results were discussed. The effect of structure and composition on the above-mentioned properties of these fabrics has been investigated as well. Some surprising results were achieved: with increasing fabrics humidity, the air permeability almost linearly decreased, whereas the total cooling heat flow (due to water evaporation from the wet fabric surface) slowly increased.}, issn = {2617-8699}, doi = {https://doi.org/10.3993/jfbi12200901}, url = {http://global-sci.org/intro/article_detail/jfbi/4997.html} }
TY - JOUR T1 - Heat, Moisture and Air Transfer Properties of Selected Woven Fabrics in Wet State JO - Journal of Fiber Bioengineering and Informatics VL - 3 SP - 141 EP - 149 PY - 2009 DA - 2009/02 SN - 2 DO - http://doi.org/10.3993/jfbi12200901 UR - https://global-sci.org/intro/article_detail/jfbi/4997.html KW - Clothing comfort KW - thermal resistance KW - water vapour permeability KW - wet textile fabrics AB - The most important parameters characterizing thermophysiological comfort of sport and protective garments are thermal resistance, water vapour permeability and air permeability. Contrary to common textiles, protective and functional garments and some technical textiles like textile dressings are also used in wet state, which affects their comfort properties. However, common measuring instruments mostly do not enable reliable measurement of wet fabrics, due to long time of measurement, during which the fabrics get dry. In this paper two fast measuring PC evaluated instruments ALAMBETA and PERMETEST commercial instruments are described, which provide reliable non-destructive measurement of thermal conductivity, thermal resistance and water vapour permeability of fabrics in dry and wet state. By means of these instruments, thermal resistance and water vapour permeability of heavy cotton and cotton/PES woven fabrics in wet state were experimentally determined and results were discussed. The effect of structure and composition on the above-mentioned properties of these fabrics has been investigated as well. Some surprising results were achieved: with increasing fabrics humidity, the air permeability almost linearly decreased, whereas the total cooling heat flow (due to water evaporation from the wet fabric surface) slowly increased.
Lubos Hes & Carmen Loghin. (2019). Heat, Moisture and Air Transfer Properties of Selected Woven Fabrics in Wet State. Journal of Fiber Bioengineering and Informatics. 2 (3). 141-149. doi:10.3993/jfbi12200901
Copy to clipboard
The citation has been copied to your clipboard