@Article{AAMM-9-3, author = {V., Senthil, P., Nayaki, M. and Saravanan, S. and X., Niu, D. and P., Kandaswamy}, title = {Natural Convection Cooling of an Array of Flush Mounted Discrete Heaters Inside a 3D Cavity}, journal = {Advances in Applied Mathematics and Mechanics}, year = {2017}, volume = {9}, number = {3}, pages = {698--721}, abstract = {

An investigation of natural convective flow and heat transfer inside a three dimensional rectangular cavity containing an array of discrete heat sources is carried out. The array consists of a row and columnwise regular arrangement of identical square shaped isoflux discrete heaters and is flush mounted on a vertical wall of the cavity. A symmetrical isothermal sink condition is maintained by cooling the cavity uniformly from either the opposite wall or the side walls or the top and bottom walls. The other walls of the cavity are maintained adiabatic. A finite volume method based on the SIMPLE algorithm and the power law scheme is used to solve the conservation equations. The parametric study covers the influence of pertinent parameters such as the Rayleigh number, the Prandtl number, side aspect ratio of the cavity and cavity heater ratio. A detailed fluid flow and heat transfer characteristics for the three cases are reported in terms of isothermal and velocity vector plots and Nusselt numbers. In general, it is found that the overall heat transfer rate within the cavity for $Ra =10^7$ is maximum when the side aspect ratio of the cavity lies between 1.5 and 2. A more complex and peculiar flow pattern is observed in the presence of top and bottom cold walls which in turn introduces hot spots on the adiabatic walls. Their location and size are highly sensitive to the side aspect ratio of the cavity and hence offers more effective ways for passive heat removal.

}, issn = {2075-1354}, doi = {https://doi.org/10.4208/aamm.2015.m1245}, url = {https://global-sci.com/article/73272/natural-convection-cooling-of-an-array-of-flush-mounted-discrete-heaters-inside-a-3d-cavity} }