arrow
Volume 6, Issue 3
Micromechanical Analysis of Flexible Low Density Open-Cell Foam with Unit Cell in Moulding Process Using Finite Element Method

Long Wu, Kit-Lun Yick, Zerance Ng & Joanne Yip

Journal of Fiber Bioengineering & Informatics, 6 (2013), pp. 253-263.

Published online: 2013-06

Export citation
  • Abstract
To investigate the compressive effects through microscopic features of flexible low-density open-cell PU foam during moulding process, FE simulation of deformation based on a regular dodecahedron cell unit with uniaxial compression behavior is undertaken to examine the mechanical properties of the vertical loading direction, and to facilitate the incorporation of solid PU material properties and variations in cell geometry. By the use of a factorial design, the mean strut thickness of solid struts has a positive non-linear effect on the maximum reaction force as compared against cell size with a negative non-linear effect. The Young's modulus of solid polymers had a positive linear effect on the response while the Poisson's ratio had the least impact on the response. Development of a simplified cell unit can model the behavior of open-cell PU foam under uniaxial compression which is an effective way to understand the mechanical behavior of foam during moulding process.
  • AMS Subject Headings

  • Copyright

COPYRIGHT: © Global Science Press

  • Email address
  • BibTex
  • RIS
  • TXT
@Article{JFBI-6-253, author = {}, title = {Micromechanical Analysis of Flexible Low Density Open-Cell Foam with Unit Cell in Moulding Process Using Finite Element Method}, journal = {Journal of Fiber Bioengineering and Informatics}, year = {2013}, volume = {6}, number = {3}, pages = {253--263}, abstract = {To investigate the compressive effects through microscopic features of flexible low-density open-cell PU foam during moulding process, FE simulation of deformation based on a regular dodecahedron cell unit with uniaxial compression behavior is undertaken to examine the mechanical properties of the vertical loading direction, and to facilitate the incorporation of solid PU material properties and variations in cell geometry. By the use of a factorial design, the mean strut thickness of solid struts has a positive non-linear effect on the maximum reaction force as compared against cell size with a negative non-linear effect. The Young's modulus of solid polymers had a positive linear effect on the response while the Poisson's ratio had the least impact on the response. Development of a simplified cell unit can model the behavior of open-cell PU foam under uniaxial compression which is an effective way to understand the mechanical behavior of foam during moulding process.}, issn = {2617-8699}, doi = {https://doi.org/10.3993/jfbi09201303}, url = {http://global-sci.org/intro/article_detail/jfbi/4839.html} }
TY - JOUR T1 - Micromechanical Analysis of Flexible Low Density Open-Cell Foam with Unit Cell in Moulding Process Using Finite Element Method JO - Journal of Fiber Bioengineering and Informatics VL - 3 SP - 253 EP - 263 PY - 2013 DA - 2013/06 SN - 6 DO - http://doi.org/10.3993/jfbi09201303 UR - https://global-sci.org/intro/article_detail/jfbi/4839.html KW - Moulding KW - Mould Head KW - Numerical Simulation KW - Foam AB - To investigate the compressive effects through microscopic features of flexible low-density open-cell PU foam during moulding process, FE simulation of deformation based on a regular dodecahedron cell unit with uniaxial compression behavior is undertaken to examine the mechanical properties of the vertical loading direction, and to facilitate the incorporation of solid PU material properties and variations in cell geometry. By the use of a factorial design, the mean strut thickness of solid struts has a positive non-linear effect on the maximum reaction force as compared against cell size with a negative non-linear effect. The Young's modulus of solid polymers had a positive linear effect on the response while the Poisson's ratio had the least impact on the response. Development of a simplified cell unit can model the behavior of open-cell PU foam under uniaxial compression which is an effective way to understand the mechanical behavior of foam during moulding process.
Long Wu, Kit-Lun Yick, Zerance Ng & Joanne Yip. (2019). Micromechanical Analysis of Flexible Low Density Open-Cell Foam with Unit Cell in Moulding Process Using Finite Element Method. Journal of Fiber Bioengineering and Informatics. 6 (3). 253-263. doi:10.3993/jfbi09201303
Copy to clipboard
The citation has been copied to your clipboard